Crushed stone Calculator: Cubic Yards, Tons and Bags
Estimate crushed stone for base layers, drainage and paths. Type your measurements or draw the area on a map, and get an estimate you can print and take to a supplier.
Crushed stone calculator
Runs in your browser. Nothing you type or draw is sent to us or saved.
4 inches is common for walkway base; driveways and drainage often go deeper.
1.4 tons per cubic yard is the figure several bulk stone suppliers' calculators use.
Roll and pallet sizes vary by farm. Use your supplier's numbers.
Bag pallet sizes
Bags per pallet vary by store and brand. Edit to match yours.
Search an address or use your location, zoom in, then click each corner of the area. The map is loaded from OpenStreetMap only after you pick this option. Your search text goes to OpenStreetMap's Nominatim service, not to us.
Click the corners of your area on the map, in order. Zoom in for accuracy.
Materials list (estimate) · November 22, 2026
Crushed stone: 200 sq ft at 4 in deep, plus 10% waste.
Volume
73.3 cu ft
Cubic yards
2.72 cu yd
Whole cubic yards to order (rounded up)
3 cu yd
Weight (tons)
3.8 tons at 1.4 tons per cu yd
0.5 cu ft bag (about 50 lb)
147 bags
Pallets of 0.5 cu ft bags (56 per pallet)
2.63 pallets (3 whole pallets)
Estimate only. Waste of 10% is included. Confirm quantities with your supplier before you order.
Estimate from lot-estimator.pages.dev. Confirm quantities with your supplier before you buy.
A 20 x 10 ft area is 200 sq ft. At 4 inches deep that's 200 x 4 / 12 = 66.7 cu ft. Add 10% waste: 73.3 cu ft, or 73.3 / 27 = 2.72 cubic yards, about 3.8 tons at 1.4 tons per cubic yard.
The math
Square feet = length x width (ft). Circles: 3.1416 x diameter² / 4. Triangles: base x height / 2.
Cubic feet = square feet x depth (in) / 12 x (1 + waste %).
Cubic yards = cubic feet / 27.
Tons = cubic yards x tons per cubic yard.
Bags = cubic feet / bag yield, rounded up.
Pallets = bags / bags per pallet.
How deep?
4 inches is common for walkway base; driveways and drainage often go deeper.
Weight
1.4 tons per cubic yard is the figure several bulk stone suppliers' calculators use. Weights vary, so the calculator lets you enter your supplier's number.
Questions
How do I figure out how much crushed stone I need?
Multiply length by width (in feet) to get square feet, multiply by the depth in inches divided by 12 to get cubic feet, then divide by 27 for cubic yards. Add a little extra for waste and settling. 4 inches is common for walkway base; driveways and drainage often go deeper.
How much does a cubic yard of crushed stone weigh?
1.4 tons per cubic yard is the figure several bulk stone suppliers' calculators use. You can type your supplier's figure into the calculator.
How many 0.5 cu ft bags of crushed stone make a cubic yard?
A cubic yard is 27 cubic feet, so it takes about 54 bags that yield 0.5 cu ft each. The calculator rounds up to whole bags.
Is this exact?
No. It's an estimate for planning. Uneven ground, compaction, moisture and product differences all change what you need, so confirm with your supplier before you order.
Estimates only. Every result is an estimate for planning. Real quantities depend on your ground, compaction, moisture, the product and the supplier. Confirm quantities with your supplier or contractor before you buy. This is general information, not engineering, construction or professional advice.