Estimate pavers for patios and walkways. Type your measurements or draw the area on a map, and get an estimate you can print and take to a supplier.
Pavers calculator
Runs in your browser. Nothing you type or draw is sent to us or saved.
Roll and pallet sizes vary by farm. Use your supplier's numbers.
Bag pallet sizes
Bags per pallet vary by store and brand. Edit to match yours.
Search an address or use your location, zoom in, then click each corner of the area. The map is loaded from OpenStreetMap only after you pick this option. Your search text goes to OpenStreetMap's Nominatim service, not to us.
Click the corners of your area on the map, in order. Zoom in for accuracy.
Materials list (estimate) · November 22, 2026
Pavers: 144 sq ft, plus 10% waste.
Paver area to order
158.4 sq ft
Pavers (8 x 4 in, about 4.5 per sq ft)
713 pavers
Pallets (100 sq ft each)
1.58 pallets (2 whole pallets)
Crushed stone base (4 in)
1.96 cu yd, about 2.74 tons
Bedding sand (1 in)
0.49 cu yd, about 0.66 tons
Estimate only. Waste of 10% is included. Confirm quantities with your supplier before you order.
Estimate from lot-estimator.pages.dev. Confirm quantities with your supplier before you buy.
A 12 x 12 ft patio is 144 sq ft. Add 10%: 158.4 sq ft. 4 x 8 inch pavers cover 32 sq in each, so about 4.5 per sq ft: 713 pavers. A 4 inch crushed stone base is about 1.96 cubic yards, and 1 inch of bedding sand is about 0.49 cubic yards.
The math
Paver area = area x (1 + waste %).
Pavers = paver area x 144 / (paver length x width in inches), rounded up.
Base (cu yd) = paver area x base depth (in) / 12 / 27; tons at 1.4 per cu yd.
Bedding sand (cu yd) = paver area x sand depth (in) / 12 / 27; tons at 1.35 per cu yd.
Questions
How many pavers per square foot?
Divide 144 by the paver's length times width in inches. A 4 x 8 inch paver is about 4.5 per sq ft; a 12 x 12 is 1. Joints make the real count a little lower; manufacturers list coverage per pallet.
How deep should the base be?
Manufacturers' installation guides commonly call for about 4 to 6 inches of compacted base under patios and walks and more under driveways. Follow the guide for your paver and soil.
How much sand goes under pavers?
A bedding layer of about 1 inch is common, plus joint sand swept in after.
Is this exact?
No. It's an estimate for planning. Use the manufacturer's coverage per pallet and confirm with your supplier.
Estimates only. Every result is an estimate for planning. Real quantities depend on your ground, compaction, moisture, the product and the supplier. Confirm quantities with your supplier or contractor before you buy. This is general information, not engineering, construction or professional advice.